The barrel of integrated prefabricated pump station has the function of automat

The barrel of integrated prefabricated pump station has the function of automatic desilting

The barrel of the integrated prefabricated pump station produced by our factory has the function of automatic desilting, which can automatically remove sludge and reduce odor. As for the pump station, if the crushing grid is adopted, it can avoid the use of the sewage and garbage in the pump to be cleaned up at any time, and the use of the crushing grid can make the large solid garbage into small particles and enter the pump with the water, which reduces the residence time of the garbage in the pump station.

Integrated prefabricated pump station structure

The barrel of the pump station, the maintenance platform of the pump station, as well as the pressure pipeline, the maintenance ladder of the pump station, as well as the material, brand and composition of the grid filter device, coupling system, anti-skid well cover, etc. Although they are of the same structure, they need to be strictly tested from small parts to the overall design. All parts are provided in complete sets, and they can only be delivered after installation

Installation of integrated prefabricated pump station

When the integrated prefabricated pump station is installed, it is basically installed underground or on the ground. It can be installed according to the local geological conditions. During the installation, the size of the surrounding area should be considered, and then a reasonable space should be selected for installation. If the installation is to be carried out on the ground, the installation of each square meter should also be calculated The bearing pressure of M must be more than 5T. If the foundation is installed underground, there is basically more equipment height. The excavation around must be equipped with some installations more than 500mm away from the foundation line, so as to facilitate the installation of pipes.

Post maintenance of integrated prefabricated pump station

Now the integrated prefabricated pump station itself has a very good self-cleaning ability, but when it is used for a long time, the good things will basically fail. Therefore, a complete set of maintenance system should be basically established. In the existing maintenance and repair process, we should pay special attention to the fans and pumps of this equipment, because these two parts are easy to be damaged.